Quick answer: most 1000-piece jigsaws finish at about 70 × 50 cm (27 × 20 in) — a Ravensburger 1000-piece fits our 50 × 70 cm frame. Some brands make them bigger — White Mountain's are 61 × 76 cm (24 × 30 in) — so measure your finished jigsaw before ordering a frame.
Typical finished jigsaw sizes
| Pieces | Typical finished size | Frame to choose |
| 500 | about 49 × 36 cm (Ravensburger) | custom framing, cut to your measurements |
| 1000 | Ravensburger: 70 × 50 cm | 50 × 70 cm frame |
| 1000 | Buffalo Games: 68 × 50 cm (26¾ × 19¾ in) | 20 × 27 in frame |
| 1000 (large-piece brands) | White Mountain: 61 × 76 cm (24 × 30 in) | 24 × 30 in frame |
| 1500 | Ravensburger: 80 × 60 cm | 60 × 80 cm frame |
| 2000 | about 98 × 75 cm (Ravensburger) | Too large to frame |
The same piece count can come out quite differently between brands, and between designs from the same brand: large-piece and "family" jigsaws are much bigger than standard ones. Even Ravensburger describes its sizes as approximate. Treat these as a guide, not a measurement.
Measure your finished jigsaw
Measure the completed jigsaw edge to edge in both directions, at the widest points. Jigsaws are rarely perfectly square at the corners, so take the larger figure each way. If your jigsaw matches one of the sizes above, choose that size on our puzzle frame page. If it doesn't, custom framing cuts a frame to your exact measurements.
Glue it first
Puzzle glue brushed over the front, or adhesive puzzle sheets on the back, turns a finished jigsaw into one piece that you can lift and slide into a frame. Let the glue cure fully before framing. It isn't required, but an unglued 1000-piece jigsaw is hard to move without losing a corner.
Mount or no mount?
A mount gives a finished jigsaw a gallery look and hides uneven outer edges. Add one through custom framing: enter your jigsaw's size as the opening and choose the border. It works on jigsaws up to 61 cm (24 in) on the short side, which covers every 500-piece and most 1000-piece jigsaws. Larger jigsaws look best framed edge to edge.
How big can we go?
Without a mount, we can frame a jigsaw up to 66 cm (26 in) on its short side and about 130 cm on its long side. That covers almost every 1000-piece and 1500-piece jigsaw. Most 2000-piece jigsaws are around 75 cm on the short side, which is beyond what we can make.
Hanging a large jigsaw frame
A framed 1000-piece jigsaw is wider than most wall art, so centre it over furniture and leave a 15–20 cm gap above a sofa or sideboard. Our guide to hanging framed prints on any wall covers fixings for heavier frames.