How Big Is a 1000-Piece Puzzle? Puzzle Sizes and the Frames That Fit

Quick answer: most 1000-piece puzzles finish at about 27 × 20 inches (70 × 50 cm) — a Ravensburger 1000-piece fits our 50 × 70 cm frame. Some brands make them bigger — White Mountain's are 24 × 30 inches — so measure your finished puzzle before ordering a frame.

Completed coastal village jigsaw in an oak frame beside a measuring ruler.

Quick answer: most 1000-piece puzzles finish at about 27 × 20 inches (70 × 50 cm) — a Ravensburger 1000-piece fits our 50 × 70 cm frame. Some brands make them bigger — White Mountain's are 24 × 30 inches — so measure your finished puzzle before ordering a frame.

Typical finished puzzle sizes

Pieces Typical finished size Frame to choose
500 about 19 × 14 in (Ravensburger: 49 × 36 cm) custom framing, cut to your measurements
1000 Ravensburger: 70 × 50 cm (27½ × 19½ in) 50 × 70 cm frame
1000 Buffalo Games: 26¾ × 19¾ in 20 × 27 in frame
1000 (large-piece brands) White Mountain: 24 × 30 in 24 × 30 in frame
1500 Ravensburger: 80 × 60 cm (31½ × 23½ in) 60 × 80 cm frame
2000 about 38½ × 29½ in (Ravensburger: 98 × 75 cm) Too large to frame

The same piece count can come out quite differently between brands, and between designs from the same brand: large-piece and "family" puzzles are much bigger than standard ones. Even Ravensburger describes its sizes as approximate. Treat these as a guide, not a measurement.

Measure your finished puzzle

Measure the completed puzzle edge to edge in both directions, at the widest points. Puzzles are rarely perfectly square at the corners, so take the larger figure each way. If your puzzle matches one of the sizes above, choose that size on our puzzle frame page. If it doesn't, custom framing cuts a frame to your exact measurements.

Glue it first

Puzzle glue brushed over the front, or adhesive puzzle sheets on the back, turns a finished jigsaw into one piece that you can lift and slide into a frame. Let the glue cure fully before framing. It isn't required, but an unglued 1000-piece puzzle is hard to move without losing a corner.

Mat or no mat?

A mat gives a finished jigsaw a gallery look and hides uneven outer edges. Add one through custom framing: enter your puzzle's size as the opening and choose the border. It works on puzzles up to 24 inches (61 cm) on the short side, which covers every 500-piece and most 1000-piece puzzles. Larger puzzles look best framed edge to edge.

How big can we go?

Without a mat, we can frame a puzzle up to 26 inches (66 cm) on its short side and about 51 inches (130 cm) on its long side. That covers almost every 1000-piece and 1500-piece puzzle. Most 2000-piece puzzles are around 29 inches on the short side, which is beyond what we can make.

Hanging a large puzzle frame

A framed 1000-piece puzzle is wider than most wall art, so center it over furniture and leave a 6–8 inch gap above a sofa or sideboard. Our guide to hanging framed prints on any wall covers fixings for heavier frames.

Frequently asked questions

How big is a 1000-piece puzzle?

Usually about 27 × 20 inches (70 × 50 cm): Ravensburger's are 70 × 50 cm and Buffalo Games' 26¾ × 19¾ inches. Some brands are larger — White Mountain's 1000-piece puzzles are 24 × 30 inches. Measure yours before ordering a frame.

What size frame do I need for a 1000-piece puzzle?

It depends on the brand: a Ravensburger 1000-piece fits our 50 × 70 cm frame, a Buffalo Games 1000-piece our 20 × 27 inch frame, and a White Mountain 1000-piece our 24 × 30 inch frame. For any other size, custom framing cuts a frame to your puzzle's measurements.

Can you frame a 1500-piece puzzle?

Usually yes. A Ravensburger 1500-piece is 80 × 60 cm (31½ × 23½ inches) and fits our 60 × 80 cm frame. Other 1500-piece puzzles up to 26 inches on the short side can be framed through custom framing.

Can you frame a 2000-piece puzzle?

Usually not. Most are around 38 × 29 inches, and we can frame up to 26 inches on the short side. A 2000-piece panoramic puzzle within that can work.

Do I need to glue my puzzle before framing?

It isn't required, but puzzle glue or adhesive sheets hold it together as one piece, which makes it far easier to lift into the frame.

Can I put a mat around a puzzle?

Yes, through custom framing, for puzzles up to 24 inches (61 cm) on the short side. Enter the puzzle's size as the opening and choose your border.